MSC01550 Boss 7'6 V-Plow Center Hinge Pin ( Pre-2007 plows )

Boss Center Hing Pin # MSC01550. This also replaces the old # VHD06502. 

This center pin is for an RT3 7.6' and RT2 7.6', for serial numbers that are #107389 or lower and 2007 or older.

It you have an 8'2" or 9'2" plow you need pin # MSC01507.

For newer plows serial # 107389 and 2008 up you will need center hinge pin # MSC11050.

To make sure this is what you need - this is a 1" pin, from end to end it is 21-3/4", it has a hole drilled in the top plate to hold into place.